Borg Warner Turbos K27 Turbocharger (450Hp) (15327988000)
Borg Warner Turbos K27 Turbocharger (450Hp) (15327988000)
Couldn't load pickup availability
Borg Warner Turbos K27 replacement for the Holset HX35W turbocharger.
Borg Warner Turbos K27 turbocharger is capable of supporting diesel trucks up to 450HP. Featuring a 60/83.7mm Forged Milled Wheel (FMW). The 7/7-blade compressor is made to resist low- and high-cycle fatigue. The 70/58.83mm 12 blade Inconel turbine is made for quick response. The turbine wastegate housing is a twin-volute, and an adjustable wastegate actuator is preset at 26 PSI (325hp), which is safe up to 40PSI (450hp) with a Power Driven Diesel Turbo Tuner. Like the Holset, the oil inlet is a threaded M12 and the oil drain is threaded M8.
1998.5-2002.5 Cummins with an HX35W turbocharger, A Cummins 3927811 cast elbow, and a 3903652 v-clamp is needed to use your current downpipe.
1998.5-2002.5 Cummins with an HY35W, A Cummins 3927811 cast elbow, and a 3903652 v-clamp is needed to use your current downpipe. Replacement of the two studs installed into the original turbine inlet flange will also be needed
2003-2007.5 Cummins with either an HY35W, HE351W, or HE351CW a fabricated or adaptor for the compressor discharge and for the turbine discharge are necessary. With a HE351CW turbocharger, a boost fooler, or resistor is also necessary.
Compatible With:
- 1989 Dodge 5.9L 12V Cummins
- 1990 Dodge 5.9L 12V Cummins
- 1991 Dodge 5.9L 12V Cummins
- 1992 Dodge 5.9L 12V Cummins
- 1993 Dodge 5.9L 12V Cummins
- 1994 Dodge 5.9L 12V Cummins
- 1995 Dodge 5.9L 12V Cummins
- 1996 Dodge 5.9L 12V Cummins
- 1997 Dodge 5.9L 12V Cummins
- 1998 Dodge 5.9L 12V Cummins
- 1998.5 Dodge 5.9L 24V Cummins
- 1999 Dodge 5.9L 24V Cummins
- 2000 Dodge 5.9L 24V Cummins
- 2001 Dodge 5.9L 24V Cummins
- 2002 Dodge 5.9L 24V Cummins
*May not work for all builds due to other engine/vehicle modifications
Check out the PDD YouTube for anything and everything diesel performance!